Belles Integrated Amplifier - Aria Integrated

Belles Integrated Amplifier - Aria Integrated

Belles Integrated Amplifier - Aria Integrated

  • Brand:Belles
  • Product Code:Aria Integrated
  • Availability:In Stock
  • $2,900.00

    Please call 416-251-1111 for the best possible pricing.

This Belles Aria is a 75 watt X 2 solid-state integrated amplifier. 

Some of The old adage that the shortest distance between two points is a straight line has application in the realm of  high‐end audio. When the distance between the various components necessary to reproduce a clean, accurate audio performance is straight and direct, the results can be truly amazing.

The Belles Aria Integrated Amplifier provides an analog experience and all of its virtues in one simple, physical enclosure. All the functional components necessary to create that performance: phono, line, headphone, and power stages, are in straight‐line proximity to one another. The one enclosure performing these many functions eliminate the need for an extra chassis and interconnect cables.

The Belles Aria is state‐of‐the‐art is its design. The unit’s phono, headphone, and preamplifier stages use Burr‐Brown amplifiers, known in pro circles for their ultra‐low distortion characteristics. The power amplifier is a discrete, fully‐complimentary design utilizing mosfet transistor output stages. The unit is capable of producing 75 watts per channel into 8 ohms.

The Belles Aria Integrated Amplifier is the shortest distance between you and pure audio enjoyment.

  • Moving magnet phono stage using Burr-Brown amplifiers for ultra-low distortion. Precision resistor and polypropylene capacitor equalization network results in an accurate RIAA curve

  • Discrete, fully complementary power amplifier with power MOSFET output stage. The amplifier produces 75 watts per channel of clean power into 8 ohms

  • Inputs: 1 moving magnet phono; 3 line

  • LED indicators for input, monitor and mute

    Manual and remote controlled Alps volume potentiometer

    Black or silver machined aluminum front panels

Preamp line stage is powered by a Burr Brown OPA551 pro amplifier, capable of driving up to 200mA of current and operate up to ±30 volts of power. The result is low distortion, wide bandwidth and effortless headphone amplification

Power amplifier bypass so, if desired, the power amplifier can be accessed by another source, without going through the preamplifier

Remote control included

Headphone jack & preamp outputs

Premium, machined, gold-plated RCA input and binding post output connectors

Mute control


Power output (both channels driven)

Damping factor Peak current Input impedance Input Sensitivity

Gain Noise Frequency Response Headphone Section

75 watts into 8Ω; 125 watts into 4Ω /
112 watts into 8
Ω: 175 watts into 4Ω (with one channel driven)

over 2,000 @ 1kHz
> 16 amperes 47,000
1.2 volts for 75 watts

21 voltage ratio or 26.4dB >100dB 0.6 to 100,000 Hz ± 3dB
Power: 600 milliwatts into 30
Ω peak

Power Amplifier Section

Frequency Response

Gain Noise Distortion

20 to 20,000 Hz ± 0.05dB

33dB @ 1kHz >80dB < 0.0001%

Moving Magnet Phone Section

Functions etc.

3 line; 1 phono moving magnet; 1 bypass and 1 monitor

1 speaker; 1 monitor, 1 preamplifier and 1 headphone

Power; Mute; Inputs (1, 2, 3, Phono); Mon (monitor/bypass); Volume

120VAC, 5A or 200-240VAC, 3.15A (SB fuse)

16.5 x 3.125 x 14” / 419 x 79 x 356mm (excluding jacks and controls)

Shipping Weight
Designed and built in Pittsford, New York USA

Unbalanced stereo inputs

Unbalanced stereo outputs

Pushbutton & Remote Controls

Power Rating Dimensions (WxHxD)

24lb / 10.9 kg 5 years

Frequency Response Distortion

Line Section

1.5 to 250,000 Hz ± 3dB
IM and THD < 0.001%
3 voltage, 9.54dB.

Write a review

Note: HTML is not translated!
    Bad           Good