NuPrime DAC/Preamp - DAC-10

NuPrime DAC/Preamp - DAC-10

NuPrime DAC/Preamp - DAC-10

  • Brand:NuPrime
  • Product Code:DAC-10
  • Availability:In Stock
  • $1,999.00


Available Options

Several notable features:
Five digital and two stereo inputs for system flexibility.
SABRE32 Reference ES9018K2M from ESS Technology is one of the world’s best-performing 32-bit audio DAC solution for high-end consumer applications and professional studio equipment. With ESS’s 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented dynamic range of up to 127dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, all of which put the DAC-10H at the industry’s cutting edge.
Symmetrical signal processing with exact signal transmission over the entire frequency spectrum and extremely low harmonic distortion, ensuring an unadulterated musical presentation.
Asynchronous transfer mode.
Ultra-low-noise JFETs in the input stage for the lowest possible noise level.
Supports DSD native playback by ASIO2.1 (up to 11.2MHz) and DoP (up to 5.6MHz) method.
Sample Rate Display – 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz and DSD64 to DSD256.
Unique dual gain settings for RCA with 2V or 4V outputs, XLR with 4V or 8V outputs; and each of the balanced and unbalanced headphone outputs with four different high power output settings.
Exclusive driver software for Windows. Standard driver software for Mac.
Headphone Amplifier
Today’s best headphones can cost as much as a high-end DAC.  Their owners demand a headphone amp that fully exploits their potential.  Key features of the headphone amp:

A 4-pin balanced and a standard 6.2mm stereo headphone amplifier outputs. 
Output circuitry designed for use with up to two dynamic headphones. Consistent wiring and the use of XLR-4 sockets ensure excellent channel separation.
A gain switch for use with in-ear, on-ear and over-ear headphones.
Other Features
Linear power supply with multi-rail toroidal transformer.
Independent left/right channel power supplies.
12V trigger output
Full microprocessor control with memory retention
Included remote control for full convenience.
Available in stylish black or silver anodized aluminum finish

1 x USB Digital 
2 x Coaxial Digital S/PDIF
2 x Optical Digital S/PDIF
2 x Analog Stereo RCA
Optical (up to 24 bit/192 kHz)
Stereo RCA (Line out). Output impedance < 100 Ohms. Max output: 2V (low gain); 4V (high gain)
Stereo Balanced (XLR-3 socket pre-out ). Output impedance < 100 Ohms. Max output: 4V (low gain); 8V (high gain)
Balanced headphone amplifier (XLR-4 socket )
Unbalanced headphone amplifier (6.3 mm jack socket )
USB Sampling Rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz, 352.8KHz, 384KHz and DSD 2.8MHz (DSD64) , 5.6MHz (DSD128) 11.2MHz (DSD256)
S/PDIF Sampling Rates: 44.1KHz, 48KHz, 88.2KHz, 96, 176.4KHz, 192KHz
Maximum Sampling Rate: 24-bits
Bit Resolution: 16-24-bits
Frequency Response: 10Hz to 80kHz
Output Impedance: 100 ohm
Max. output power:  680 mW @ 1 kHz and 600 ohm load at the XLR-4 output
Frequency response:  < 10 Hz to > 100 kHz
Crosstalk attenuation: min. 93 dB @ 1 kHz
THD+N: < 0.0003%
Dynamic range: > 115 dB @ 600 ohm load (A-weighted)
Dimensions: Height: 59mm Width: 215.4mm Depth: 382.6mm
Weight: 10.5  pounds ( 4.8  kg )
Worldwide AC voltage: (90VAC~130VAC // 210VAC~ 250VAC) With Voltage Select Switch
AC Fuse: Slow-blow,T2.5A, 250VAC
Power Consumption:
With 110V outlet, the standby power consumption is below 1.17W.
With 230V outlet, the standby power consumption is below 2W.
With 110V outlet, the idle power consumption is below 13W.
With 230V outlet, the idle power consumption is below 14W.

Write a review

Note: HTML is not translated!
    Bad           Good